J-B Weld Plastic Bonder Syringe- Tan
J-B Weld Plastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more.
Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.
Interior & Exterior Plastic Parts
Made in the USA
Clean repair area of dirt, grease, oil, paint, rust etc. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse snadpaper to provide best repair.
After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
Press with appropriate tool in an even coat, weld bead or extruded shape as needed.
Sets in 15 minutes. Cures in 30 minutes. If temperature is below 40ºF, then set time will be longer.