top of page

J-B Weld Plastic Bonder Syringe- Tan

50133 Plastic Bonder Syringe FLT.jpg
JB50133

Strength

3770 PSI

Set Time

15 minutes

Functional Cure

30 Minutes

J-B Weld Plastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more.

Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.

 

Great For:

​

  • Filling Dents

  • Bumpers

  • Automotive Trim

  • Composite Panels

  • Interior & Exterior Plastic Parts

  • Fiberglass

Cure Colour

Tan

Made in the USA US flag

Instructions

PREPARE:

Clean repair area of dirt, grease, oil, paint, rust etc. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse snadpaper to provide best repair.

MIX:

After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.

APPLY:

Press with appropriate tool in an even coat, weld bead or extruded shape as needed.

DRY:

Sets in 15 minutes. Cures in 30 minutes. If temperature is below 40ºF, then set time will be longer.

bottom of page