J-B Weld PlasticWeld Epoxy Syringe

JB50132

Strength

3900 PSI

Set Time

5 minutes

Functional Cure

1 Hour

J-B Weld PlasticWeld is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs.  

PlasticWeld will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld combines to a tensile strength of

3900 PSI and cures to an off-white color.

 

Great For:

  • Most Hard Plastics

  • ABS

  • Fiberglass

  • PVC

  • Glass

  • Vinyl

  • Most Composites

Cure Colour

Off White

Made in the USA US flag

Instructions

PREPARE:

Clean repair area of dirt, grease, oil, paint, rust etc.

MIX:

After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.

APPLY:

Press with appropriate tool in an even coat, weld bead or extruded shape as needed.

DRY:

Sets in 5 minutes. Cures in 1 hour. If temperature is below 40ºF, then set time will be longer.